Announcing: Slashdot Deals - Explore geek apps, games, gadgets and more. (what is this?)

Thank you!

We are sorry to see you leave - Beta is different and we value the time you took to try it out. Before you decide to go, please take a look at some value-adds for Beta and learn more about it. Thank you for reading Slashdot, and for making the site better!

Hierarchical Membrane For Cleaning Up Oil Spills

Unknown Lamer posted about 7 months ago | from the what-about-anarchist-membranes dept.

Earth 32

rtoz (2530056) writes Whenever there is a major spill of oil into water, the two tend to mix into a suspension of tiny droplets, called an "emulsion." It is extremely hard to separate them, and they can cause severe damage to ecosystems. Now, MIT researchers have discovered a new, inexpensive way of getting the two fluids apart again. This new approach uses membranes with hierarchical pore structures. The membranes combine a very thin layer of nanopores with a thicker layer of micropores to limit the passage of unwanted material while providing strength sufficient to withstand high pressure and throughput.

Sorry! There are no comments related to the filter you selected.

Solved problem (5, Insightful)

snsh (968808) | about 7 months ago | (#47368795)

Easier to follow Exxon's example and dump tons of dispersant into your oil spill, and watch the globs disappear from plain sight.

Re:Solved problem (5, Funny)

pepty (1976012) | about 7 months ago | (#47368969)

You know, I don't think I've ever heard of a mix of cash, lawyers, and lobbyists being referred to as "dispersant" before.

Re:Solved problem (0)

Anonymous Coward | about 7 months ago | (#47369263)

We'd have fewer problems if we added chum to the spill, true. Human hair and cash are decent oil absorbers.

Re:Solved problem (1)

internerdj (1319281) | about 7 months ago | (#47369287)

However it seems a technically accurate term.

Re:Solved problem (1)

LifesABeach (234436) | about 7 months ago | (#47371667)

I'd watch it on Pay Per View.

Re:Solved problem (3, Insightful)

frinkster (149158) | about 7 months ago | (#47369123)

Easier to follow Exxon's example and dump tons of dispersant into your oil spill, and watch the globs disappear from plain sight.

How this got moderated as Interesting I have no idea - I found it to be quite funny.

But the truth is that that industrial corporations are very sensitive to economics. Crude oil is very valuable and dispersant is very expensive. Any product that allows them to recover the oil economically will be used extensively.

The environmental movement really advanced when people started explaining to corporations that pollution was nothing more than raw inputs that they paid for and are now throwing away. A lot of industrial companies have entire divisions dedicated to selling products produced with what used to be stuff they threw out or paid someone to dispose of.

Re:Solved problem (3, Informative)

i kan reed (749298) | about 7 months ago | (#47369357)

BP got in big trouble for an internal memo that discussed the idea of reclaiming the oil. It was a "how dare they think of protecting their assets after doing this" outrage.

I don't have a strong opinion about that memo or the outrage(even though I'm quite concerned with environmental matters on principle). Just that that happened.

Re:Solved problem (2)

Immerman (2627577) | about 7 months ago | (#47369721)

Perhaps. Economically is the key word though, and that filter is going to have to be phenomenally cheap and effective to make it worth it for recovering oil from seawater. How many barrels of oil at $100 per barrel do you suppose $100 worth of filter can filter out? And then you have the fact that the filtered oil is going to be thoroughly contaminated with salts, plankton, diatoms, and everything else found in seawater that's either oil soluble or bigger than an oil molecule, which could potentially increase refining costs considerably. Plus the costs of operating all the ships and pumping equipment necessary to chase an oil slick around the ocean and filter all that seawater in the first place, which is probably going to dwarf the cost of filters.

This could be a great thing for spill cleanup, It might even help to substantially defray the costs of performing it. But I suspect oil companies will still have to be legally forced to clean up after themselves - after all, they generally don't own the oil until after they've pumped it, and pumping more oil is going to be far more profitable than filtering a spill.

Re:Solved problem (0)

Anonymous Coward | about 7 months ago | (#47370505)

Or just blame the British and issue a huge fine even if it was crewed by Americans and following American industry practices

Is this better for pour-over or French Press? (4, Interesting)

pepty (1976012) | about 7 months ago | (#47368859)

Solomon performed experiments showing the effectiveness of the membranes in separating nanoemulsions while maintaining integrity at high pressure. The team used various techniques — including differential scanning calorimetry, dynamic light scattering, and microscopy — to test the separation efficiency, showing more than 99.9 percent separation. Microscopy images show the membrane in operation, with dye added to the water to make the droplets more obvious. Within seconds, an oil-water mixture that is heavily clouded becomes perfectly clear, as the water passes through the membrane, leaving pure oil behind. As shown in the microscope images, Solomon says, “We’re not only getting rid of the droplets you can see, but also smaller ones,” which contribute to the cloudy appearance.

How much oil (weight/weight) can a piece of membrane hold on to? Can the oil be stripped off of the membrane so that the membrane can be reused? If the answers are "less than 1:1" and "no", this might still be useful as a final purification stage after most of the oil has been removed or for situations where you are trying to clear smaller amounts of more toxic materials.

Re:Is this better for pour-over or French Press? (1)

bobaferret (513897) | about 7 months ago | (#47369889)

I was under the impression that the membrane was simply separating oil from water, but not holding onto anything. A mechanical process could simply wipe the oil from the membrane, while at the same time apply pressure to push the water through.

Re:Is this better for pour-over or French Press? (0)

Anonymous Coward | about 7 months ago | (#47373599)

This can't be a serious post, and to get +5 is mind blowing. You guys don't understand simple things. How on earth did you get to the internet. The membrane doesn't hold anything, it is a filter separating oil and water. It uses gravity.

great article (-1)

Anonymous Coward | about 7 months ago | (#47368913)

great article - you can resolution on http://www.consumer-court.in

These guys should team up with Kevin Costner (1)

Anonymous Coward | about 7 months ago | (#47368997)

Kevin Costner had a centrifugal separator that was highly efficient, but could not achieve clean enough water to be allowed to help with past oil spills. Mixing his system with this could get the total system efficiency needed to do significant recovery of spilled oil.

Better applications (0)

DoofusOfDeath (636671) | about 7 months ago | (#47369081)

Mayonnaise is also one of earth's nastiest substances - it's like the love-child of white phosphorous, Ebola, and that "Leave Brittany Alone" emo guy.

Mayonnaise is also an emulsion. Now my plans can begin in earnest.

Re:Better applications (1)

mi (197448) | about 7 months ago | (#47369181)

Mayonnaise is also one of earth's nastiest substances

This is only true about factory-made mayonnaise. The original recipe is drastically different — but can not be stored for more than a few days. If you are willing to deal with such quickly-expiring product, you can make your own at home. Recipes abound [google.com] .

Re:Better applications (1)

Bengie (1121981) | about 7 months ago | (#47369601)

Emulsion of oil(stuff I buy uses virgin olive oil), vinegar, egg yolk, and salt. I'm not quite sure how this is "nasty".

Re:Better applications (1)

DoofusOfDeath (636671) | about 7 months ago | (#47369655)

Emulsion of oil(stuff I buy uses virgin olive oil), vinegar, egg yolk, and salt. I'm not quite sure how this is "nasty".

I guess you'd need to watch the movie Undercover Brother. Its mayonnaise scene scarred me for life.

And, the idea of uncooked egg still creeps me out, to be honest.

Maxwell's Daemon next? (0)

mi (197448) | about 7 months ago | (#47369149)

The Demon [wikipedia.org] would guard a door letting fast-moving molecules of some gas (or liquid) through, but blocking the slow-moving ones. Thermodynamics will never be the same!

Re:Maxwell's Daemon next? (1)

Jason Levine (196982) | about 7 months ago | (#47369323)

Reverse that and you have the Dune shields. Block fast moving items but let slow moving ones through.

Already solved? (1)

Anonymous Coward | about 7 months ago | (#47369339)

Wasn't this issue already solved, there was I believe some competition a few years back after the gulf spill where several designs competed for prize money. One using a simple rig with rotating plastic disks with groves in them blew away the competition and went FAR beyond the requirements of the competition. Sounds like a lot easier & cheaper solution then some kind of nano material.


Re:Already solved? (2)

tomhath (637240) | about 7 months ago | (#47369867)

Here's a better discussion of skimmers [oilspillsolutions.org] . They certainly have their place and the Elastec design is very efficient.

Skimmers work on a film of oil floating on the surface, not so much for oil that has already gone into suspension under the water. This filter seems to fit the latter scenario better

Re:Already solved? (0)

Anonymous Coward | about 7 months ago | (#47370279)

I suppose emulsified oil is something to be addressed, but the concentrations are often very low equating to about 1 tablespoon in 130 gallons of water. Efforts should focus on the surface, and the ocean bottom (in some cases) where a vast majority of the oil collects.

Re:Already solved? (1)

517714 (762276) | about 7 months ago | (#47370419)

Technically, yes, there are solutions. Politically, no, the Federal Government would not allow BP to deploy booms and skimmers that, being under foreign registries, might not be unionized. In hindsight, BP should have used them and appealed to Congress, the courts, and the American people for relief from the Executive Department's overreach.

Oil companies will be thrilled to hear this (1)

DickBreath (207180) | about 7 months ago | (#47369363)

They will no longer need to worry about oil spills. Many of those silly, and very expensive 'safety' precautions can now be avoided. Saving costs increases shareholder value.

The only real drawback to this solution seems to be that the membrane's ingredients do not include ground up kittens and babies.

isnt this a coaleser? (0)

Anonymous Coward | about 7 months ago | (#47369437)

isnt this a coaleser?

Vanishing Problems (1)

pubwvj (1045960) | about 7 months ago | (#47369453)

Left alone these problems have been vanishing according to recent reports. Nature is eating it up. I'm not suggesting spilling more oil, far from it, but rather to not panic quite so much.

Re:Vanishing Problems (1)

X0563511 (793323) | about 7 months ago | (#47371661)

It's not vanishing, it's doing exactly what we don't want - dispersing into the biosphere.

called as "emulsion". (-1)

Anonymous Coward | about 7 months ago | (#47369529)

'called as "emulsion". '


Lab vs. Field (1)

ThatsNotPudding (1045640) | about 7 months ago | (#47370053)

I read about this and I wish them well, especially when the membranes start to clog-up with real-ocean dirt and bacteria move in to build a cozy biofilm community.

That's nice (0)

Anonymous Coward | about 7 months ago | (#47370363)

I just hope I don't hear about them building "The Big Shell" anytime soon.

carpet... (1)

jep77 (1357465) | about 7 months ago | (#47373413)

Now all we have to do is cover the sea floor with this carpet and lift it up whenever there's a need. Perfect!

Check for New Comments
Slashdot Login

Need an Account?

Forgot your password?