Fun With an Induction Cooktop? 147
fishfrys writes "Besides generating heat quickly and efficiently in ferromagnetic pans, what sorts of fun things can you do with an induction cooktop? This seems like a pretty serious piece of electromagnetic equipment — boiling water can't be the only thing it's good for. I went to YouTube, expecting to find all sorts of crazy videos of unsafe induction cooktop shenanigans, but found only cooking. What sort of exciting, if not stupid, physics experiments can be performed with one? Hard drive scrubber? DIY Tesla coil? There's got to be something."
Yes! (Score:1)
Re: (Score:2)
You could be the first man to be arrested for aggressive chicken handling!
Uhhh, I hate to burst your bubble, but in Texas they are already passed 5 digits for people arrested for Aggressive Chicken Handling. I hear Arkansas has a special prize for the millionth "customer" too.
Of course Virginia is the only state that legalized it.
make aluminum foil burn (Score:5, Interesting)
Re:make aluminum foil burn (Score:5, Informative)
For much the same reason - 'magnetic stainless' is typically said to be OK for induction cooking, and 'non-magnetic' not.
This is due to the 'skin depth' (look at wikipedia) being thinner in magnetic materials.
This means that in both steel and iron pans, which are magnetic, in addition to the high resistance of the pan material, the electricity doesn't go very deeply, so it's only passing through a thin skin of the pan.
However - with very thin containers, non-magnetic stainless works just fine.
I regularly heat up a large (non-magnetic) stainless washing up bowl that's maybe 0.5mm thick on my induction cooker.
Any thicker and it doesn't work.
My favourite utensil to use with it is actually a cheap 0.8mm or so thick steel wok.
Heats up in seconds, and once seasoned, is quite non-stick.
My second favourite is a large steel plate 6mm thick, again seasoned.
Re: (Score:1)
I regularly heat up a large (non-magnetic) stainless washing up bowl that's maybe 0.5mm thick on my induction cooker.
Washing up bowl? Please explain.
Re: (Score:2)
It's a bowl used for washing up (washing dishes) in. It's a Britishism, AFAIK.
Re: (Score:2)
It's a bowl used for washing up (washing dishes) in. It's a Britishism, AFAIK.
I think people wash dishes in most countries. It's a bad idea to do it in the sink directly, because you can chip your dishes really easily. I suspect a stainless-steel washing up basin would have exactly the same problem, which is why people mostly use plastic ones.
Re:make aluminum foil burn (Score:5, Interesting)
I think it might be fun to use a thin metal implement in a glass bowl to cook something from a hot rod.
Re: (Score:3, Informative)
Re: (Score:1)
Re: (Score:2)
Drop it (Score:2)
Re: (Score:2)
...off the roof of a building!
Catch It And You Can Keep It!! -- Firesign Theatre
Re: (Score:1)
...off the roof of a building!
Catch It And You Can Keep It!!
-- Firesign Theatre
Nope - from National Lampoon's Radio Dinner album.
Induction Heating of Block Ice = Glowing Red Hot I (Score:5, Interesting)
I remember seeing induction heating used to make a block of ice glow red hot.
http://videosift.com/video/Induction-Heating-of-Block-Ice-Glowing-Red-Hot-Ice
Apparently it heats the trace amounts iron inside the ice so this only works with tap water. Not really sure if it would work with an iduction stove top though. Worth a try.
Re: (Score:3, Interesting)
Neat. I imagine their are potential lithography applications. Or you could just inject a BB into an egg and cook it from the inside out for the ultimate in runny whites.
Re: (Score:2)
Wouldn't the BB just sink to the bottom of the egg? you'd have to suspend it in the middle of the yolk somehow...
Re: (Score:2)
Re:Induction Heating of Block Ice = Glowing Red Ho (Score:4, Insightful)
There is a triangular piece of metal in the ice. It's a demonstration by Huettinger, a manufacturer of induction heaters.
http://www.huettinger.com/en/about-us/multimedia.html
I think water would flash to steam before you got it to glow. Unless it was under enormous pressure I suppose.
Re: (Score:2)
Apparently it heats the trace amounts iron inside the ice so this only works with tap water. Not really sure if it would work with an iduction stove top though. Worth a try.
No offense, but if the ice were this hot, it'd melt and flash into steam. There's probably metal (not just trace amounts) embedded in the ice and that's what's glowing.
water balloon (Score:1)
Re:water balloon (Score:5, Informative)
Not really.
There is no 'safety mechanism' as such that stops it heating hands.
The coil can safely be energised with no load.
It won't get too hot, or anything, and it won't noticably heat your hand, or a duck, or anything non-metallic.
(well, it would heat graphite blocks and such, but that's cheating).
The reason for the device not turning on with no load is to prevent it heating up forks and other metallic implements that have been placed on the surface.
www.st.com/stonline/books/pdf/docs/12443.pdf
Re: (Score:2)
Also, I would assume, rings and jewlery that may be on your hands. Being a Canadian Engineer, I wear an iron ring, though it's non-magnetic now (closer to stainless I suppose) so I don't know how much an induction cooktop would do to it.
Then again, I prefer the primal experience of cooking on a gas flame myself.
Re: (Score:3, Interesting)
Blacksmith's induction forge: for the modern smith.
http://www.youtube.com/watch?v=k4xsqw463Hs [youtube.com]
Phil
Rail gun (Score:2)
Hardware modding may be required. Remove ceiling or wall before use. If you try it, on your own head be it - I do not guarantee your safety.
Re: (Score:2)
By that, do you imply that you do guarantee his safety, if he did not try it on his own head?
Re: (Score:2)
Sure, guarantee limited to original purchaser of advice, and not heirs or estate.
Re: (Score:2)
Wrong coiling. And the value in a coil is the coiling. So re-coiling means you are better of starting from scratch.
It's consumer electronics (Score:1)
So's a Microwave, but... (Score:2)
Re:So's a Microwave, but... (Score:4, Insightful)
A microwave oven's power source is not a maser, just like an incandescent light bulb is not a laser.
If you don't understand the distinction, PLEASE don't open up your microwave and try to make a death ray.
Re: (Score:2)
Re: (Score:1)
Re: (Score:2)
Erm.. You can make a death ray out of your microwave's magnetron, it doesn't need to be a MASER. You can make a death ray out of an equivalent-power incandescent bulb, too...
Re: (Score:2)
pump the cavity of a homemade maser with RF from a microwave oven's magnetron
Re: (Score:1)
Yes, but you still can't make it from a microwave oven.
Try whatever you got in the house. (Score:2, Funny)
Try some unexploded WW2 shells, some walmart bullets, a kid with braces. An arm with a tattoo. A hamster that ingested iron shavings. You were looking for unsafe and stupid things to try, right?
Re:Try whatever you got in the house. (Score:5, Funny)
unexploded WW2 shells, some walmart bullets, a kid with braces. An arm with a tattoo. A hamster that ingested iron shavings.
Raindrops on roses. Whiskers on kittens. Bright copper kettles. Warm woolen mittens. Brown paper packages tied up with strings.
Re: (Score:2)
> some walmart bullets
You can buy bullets in a supermarket? I guess there are some things about the USA I will never understand.
Re: (Score:1)
Re: (Score:2)
I thought Wal-Mart was a super-market?
Re: (Score:2)
Re: (Score:2)
Bullets are typically found in the hunting part of the Sporting Goods section, near all the camping gear, fishing supplies, etc.
Really? I've never seen them selling any reloading supplies...just cartridges. FYI..."bullets" are pieces of lead, possibly in combination with other metals, like copper. A cartridge is composed of a bullet stuck in a case (usually made of brass), gunpowder inside the case, and a primer on the bottom (the little button thingy that explodes and ignites the powder when the firing pin of a gun strikes it).
Re: (Score:2)
Re: (Score:2)
Haven't you seen that they're rebuilding all their standard stores into Super Wal-Marts? Been happening all around here for years. Most are now twice the size of the original, or more.
Re: (Score:2)
Or maybe it's hunting season?
remote iPhone volume control (Score:5, Interesting)
Last time I used my induction stove to cook water for noodles, I put the power to max, all the while listening to music on my iphone via headphones. You know, those standard apple headphones with microphone and volume controls. Right when I put the power to max, the music went off. Turns out the volume was set to minimum. So I tried to restore the volume via touch controls, but it went to minimum immediately, again. I already had experience with malfunctioning apple headphones (cable short-circuit) so I unplugged them, which helped. Then I noticed that the proximity to the cooktop had an effect. Apparently the induction pattern induced the same signal in the headphone cables that a volume down would produce...
Anybody with a Bosch induction stove and an iPhone/iPod should try to confirm this.
Re:remote iPhone volume control (Score:5, Funny)
In truth it was the AI in the stove commenting on your taste in music. Try it without the Celine Dion next time.
Re: (Score:2)
But.. Celine Dion [google.com] is an awesome song.
Re:remote iPhone volume control (Score:4, Interesting)
get a magnet near the headphone wires, and you can control the device.
Re: (Score:2)
This happens to me with my Kenmore model...
Re: (Score:2)
Last time I used my induction stove to cook water for noodles
"Cooking" water?
I think the term you are looking for is "heating" or "boiling." When you heat water, and then allow it to cool, it is just the same as water that was never heated. Cooking implies a permanent change to the material that has been cooked. For example, when you cook a raw chicken, and then let it cool, it doesn't revert to being a raw chicken.
Re: (Score:2)
When you heat water, and then allow it to cool, it is just the same as water that was never heated.
If you boil tap water and let it cool down, it normally has less air in it than before. When you freeze that water it will have fewer bubbles.
This concept can be useful in some cooking recipes if you don't want the final product to have so many bubbles, e.g. steamed egg/chawan mushi.
Re: (Score:2)
Re: (Score:2)
In all honesty, you are in fact cooking all the microorganisms in the water...
Re: (Score:2)
When you cook packaged pasta in boiling water it will hydrate - let it cool and sit, and it will dry back into dry pasta again. Cooking just implies more ingredients than water - not necessarily just chemical changes.
Re: (Score:1)
Producing high voltages isn't going to work. (Score:4, Informative)
Induction cooktops operate at a frequency of a few tens of kilohertz. Using it to excite a Tesla coil probably can't be made to work, at least, not with a reasonable number of turns on your secondary coil. The coil under the surface of the cooktop has a large number of turns.
(To step up voltage, you want a few turns on the primary, and many times as many turns on the secondary.)
Re: (Score:3, Interesting)
Using the coil from a monitor flyback transformer with the powdered iron core removed, the secondary often will have it's voltage rating exceeded in a spectacular display. Be sure to use lots of ventilation.
If you have several old dead monitors, you have a source of these.
Re: (Score:3, Informative)
A Tesla coil works by a very high primary pulse of current and then it ringing in a LC tank at the same frequency the resonant secondary is. Most inductive cooktops have no tuning to match the resonant frequency of the secondary. Most Tesla coils work on higher resonant frequency than the cooktops due to the nature of the secondary.
One is a non resonant shorted turn and low impedance. The other is high Q and resonant over a very narrow frequency range. Outside of resonance, it is high impedance.
Re: (Score:1)
Re: (Score:3, Interesting)
This looks like a job for--Mythbusters! (Score:1)
Re: (Score:3, Insightful)
Re: (Score:2)
How about this for a start - http://science.slashdot.org/comments.pl?sid=1845896&cid=34067684 [slashdot.org]
Mine goes up to 11 ... (Score:4, Informative)
My stove has levels that go up to 11. It's from Functionica. Whenever I get a visit from someone from the US, who has seen Spinal Tap, I show it to them and they laugh their asses off.
Re: (Score:2)
Re: (Score:2)
Re: (Score:2)
Re:Mine goes up to 11 ... (Score:4, Interesting)
Wireless charger (Score:1)
Here's one (Score:1)
I've seen induction heating used to temper truck axles, among other things. Though I imagine that with minor tweaks you could make one hell of a HERF weapon out of one. Screw up all the cell towers within a few miles, etc. Check ebay for used resturaunt equipment.
Re: (Score:3, Interesting)
> ...with minor tweaks you could make one hell of a HERF weapon out of one...
Not likely. These things operate at about 27KHz. On the other hand, you might be able to generate a couple of kilowatts of ultrasound by fabricating a "speaker cone" from a resonant metal disk and some magnets and use it to curdle your brain.
Re: (Score:3, Interesting)
I've seen induction heating used to temper truck axles, among other things.
I saw it used in the manufacture of commutators for starter motors:
- Copper bar bent into circle.
- Induction heat to orange in about 5 seconds, to weld the joint and take the stresses out of it. Result: Stress-free donut.
- Smash the donut into shape (segmented hollow top-hat) with dies.
- Mold plastic into it - to support it and make an insulated press-fit for the shaft).
- Saw the segments apa
Re: (Score:1)
Hi ULR, I've been hanging out on the same board as you, under different nicks... (otherpower.com) as for your copper question, I think you'd be better off with conventional TIG welding due to the inert gas atmosphere - it's very difficult to work copper otherwise. Certainly TIG is much cheaper. Unless you plan mass-production enough to justify the cost of induction machines.
Using it to wipe a harddrive? (Score:2)
Would that work?
Re: (Score:2)
I'm not sure about the magnetic field, but if the drive gets hot enough, it's wiped :-)
Re: (Score:3, Funny)
Why would you need to? All hard drives have a self-wiping function if you wait long enough. With today's quality control standards, you usually don't have to wait very long.
Re: (Score:2)
Well, there is the Secure Erase ATA command present on all current hard drives, which is a full drive form and something the NIST considers more secure than the old DoD multiple pass overwrite procedure. Granted, just erasing or copying over the data once is 99.9999% of the time is going to make the previous data totally unrecoverable anyway. Although the effects of an induction range on the permanent, rare-earth, magnets from the voice coil motor that moves the heads might be fun. The metal plate those
One Experiment to Try (Score:2)
Here is one experiment to try, how much can I fool around with an induction cooktop before I hurt myself?
Why So Expensive? (Score:2)
Why are induction cooktops so expensive (here in NY)? I understand they're sold cheap in Asia. They don't seem to need to be very expensive.
If they were cheap, they'd be worth using for energy efficiency. But they cost more than the energy savings.
Re: (Score:2)
Because they're cool.
Cool shit costs lots of money.
They aren't cool in Asia any more, so they are cheap.
Duh. ;)
Re: (Score:2)
Why are induction cooktops so expensive .
Because people will pay it.
Frying Passports (Score:2)
Passports with IC chips in them can have the chips fried by a microwave oven, but it's hard to figure out how much to fry them without burning the passport itself.
Can induction cooktops do it more precisely?
induction charger? (Score:2)
rig up a matching coil so that the magnetic field can be converted back to electricity and charge a battery powered device.
Calling on the /. community... (Score:1)
Re: (Score:2, Informative)
It's a nerd site. We like to investigate, determine, build and generally fiddle.
The real question is "Why is a boring muggle like you even doing here?"
Re:Lightbulb (Score:5, Funny)
Tanenbaum would have said "Holy fuck! A talking Linux!"
Re:Lightbulb (Score:5, Insightful)
2 things:
1) Asking is how you find a place to start. When I want to create with electronics, I don't do mine copper.
2) Presuming you meant Linus, he asked several people about how to create a kernel. He was taught a foundation of computer science.
Do you think Linus that created a kernel with no knowledge? having never asked an computer science questions?
Re: (Score:3, Funny)
'Imagine if Linux[sic] would have asked Tanenbaum on how to make a good kernel.'
We might have got a good kernel.
(Sorry, I couldn't resist)
Re: (Score:2)
Your sig:
Browsing with classic discussion, noscript, at -1 and nested no hidden comments and I only mod UP
Your post:
"why is a boring muggle like you even doing here?"
-1 for HP reference, -1 for grammatical failure
So in this case you wanted to mod UP by negative 2?
Re: (Score:1)
Re: (Score:2)
Why is there no -1 Dickhead?
Re:Lightbulb (Score:5, Informative)
Can we just go ahead and get a "-1, Goatse" mod option?
Re:Lightbulb (Score:4, Informative)
Can we just go ahead and get a "-1, Goatse" mod option?
Perhaps we could get /. to display the dereferenced URL instead of bit.ly, etc. -- hardly rocket science (don't click on any of these, obviously...):
/dev/null http://bit.ly/d9LffL [bit.ly] 2>&1 | grep -o 'http[^ ]*'
user@host:~$ wget -O
http://bit.ly/d9LffL [bit.ly]
http://goatse.fr/ [goatse.fr]
http://goatse.fr/ [goatse.fr]
user-side answer (w/ Greasemonkey) (Score:4, Informative)
http://userscripts.org/scripts/show/40582 [userscripts.org]
Here's a user-side answer in the form of a Greasemonkey script... /. could thereotically implement a bit of JS like that server-side (this works with a bunch of URL shorteners)
Re: (Score:2)
I clicked on the parent's link, and, for once, I am glad we have a filter here at work...
Re: (Score:3, Informative)
WARNING DO NOT CLICK GOATSE
Re: (Score:3, Funny)
Thanks, but at least provide a full list of things you shouldn't do with goatse:
Re: (Score:2)
People actually click on links to link-shortening services?